2-1/8 X 15-/2 INCH SPINDLE FOR 280581 (W803)
SKU:982-280731
Made in the USA - Spindle nut and washer sold separately
TISCO
1/2"-20 WHEEL STUD WITH 1-3/4 INCH UNDER HEAD LENGTH
SKU:
453769R2
6 Per Package. For six hole front wheel hub, except tractors with cast swept back axle or front wheel drive. Replaces 528803R1. Use with nut 453770R1.
1-5/8 X 10 INCH SPINDLE FOR 281001 ( W669 )
SKU:
982-280771
Made in the USA - Spindle nut and washer sold separately
TISCO
CLAMP PAR DOUBLE
SKU:
3615259M1
Clamp, disc to rim. Double ramp type for power adjust rims 535452M91, 535453M91, and 1687615M91. Also for power adjust rims on a wide range of models. Fits many s from the U.K., Italy, and France. Replaces 1755057M2.
1-3/4 X 10-11/16 INCH SPINDLE FOR CASE IH 465493 HUB
SKU:
982-478375
Has 2 holes for 3/8" bolts, 1 is 2" from back to hole center and 1 is 3-1/2" from back to hole center
Spindle nut and washer sold separately
Replaces Case/I.H. 478375R1 for 480-490 Disc Harrows.
Rim for Case Skid Steer Loaders 183300A3 - 9.75" x 16.5"
SKU:
W664260
Replaces Case 183300A3, 183300A1, 183300A2
Fits Case Skid Steer Loaders 60XT, 70XT, 75XT, 85XT, 90XT, 95XT, 435, 440CT, 445, 450, 465
- Rim with valve guard
- 16.5" x 9.75"
- 8 bolt holes
- 8" bolt circle
- 6" pilot hole
- 1.250" offset
- 6000 lbs. capacity
- Painted Industrial Yellow
AgSmart
WHEEL SEAL BULK-22870
SKU:
982-906487
Grease Seal - Supplied in Bulk. Will replace 22870 CR.
3 X 16 INCH SPINDLE FOR 281189 ( 75-8 )
SKU:
982-281911
Made in the USA - Spindle nut and washer sold separately
TISCO
1/2"-20 WHEEL BOLT WITH 1 INCH THREAD LENGTH
Rated 5.0 out of 5 stars
1 Review
906863M1
Fits front wheel on tractors: MF231, MF240, MF250 except Lo-profile, MF253; industrials: 20D turf or adjustable axle. Replaces 887135M1.
TISCO
Front Rim - 3" x 19" Small Center for Ford 8N1015A
SKU:
8N1015A
Front wheel, six lug. 4-9/16" center hole. Wheel uses 4.00" x 19" tire. Tractors: 8N (1948 to 1952).