AgSmart
AgSmart Disc Scraper Blade Assembly for Case IH & International 483139R92
SKU:864-CB480AL
Left hand front (right rear) gang scraper assembly for Model 480.
Includes arm and scraper blade.
AgSmart
AgSmart Disc Scraper Blade Assembly for Case IH & International 483140R92
SKU:864-CB480AR
Right hand front (left rear) gang scraper assembly for Model 480.
Includes arm and scraper blade.
AgSmart
1-1/2 INCH SQUARE AXLE RETAINING WASHER FOR CASE IH
444-SMA193929
Retaining Washer. Fits 330, 335VT - 3950, 340, 345, 370, 375 Disk and 690, 870, 875 Ripper. Will replace 193929A1. 79mm ID, 109mm OD, 3mm thick.
1-3/4 X 10-11/16 INCH SPINDLE FOR CASE IH 465493 HUB
982-478375
Has 2 holes for 3/8" bolts, 1 is 2" from back to hole center and 1 is 3-1/2" from back to hole center
Spindle nut and washer sold separately
Replaces Case/I.H. 478375R1 for 480-490 Disc Harrows.
AgSmart
AgSmart Disc Spool for Case IH 1263631C1
864-SMA1263631
Full Spool 7-1/2 inch Long, 1-1/2 inch Round Hole, Ductile Iron. Fits 330, 335VT - 475, 496, 3800, 3850, 3900, 3950, 340, and 345 Disk. Replaces 1263631C1.
AgSmart Disc Spool for Case IH 129797C1
864-SMA129797
Half Spool, Two Required, for Case IH Discs, Fits 350, 370, 478, 480, 485, 496, 3800, 3850, 501,596, 760, 770, RMX790
1-1/2 INCH SQUARE AXLE SPACER BLOCK FOR CASE IH
SKU:864-SMA100694
Square Spacer Block for Case IH Discs, Fits 122, 132, 350, 370, 3800, 3850, 475, 480, 485, 496, 501, 596, 760, 770, RMX790. Replaces 100694C1
1-1/2 INCH SQUARE AXLE END WASHER FOR CASE IH
864-SMA549974
FITS 501, 596, 770, RMX790. REPLACES 100697C1
AgSmart
12 INCH SPINDLE TUBE FOR CASE IH
864-SMA9801
Spindle tube (weld in) for Models 48, 470, 480, 490, 500 and 610 transport wheel axle assembly #481474R93. ID is 1.75", OD is 2.375", Length is 12", has 2 7/16" drilled holes 1" from each end.